New Low-profile Chip Inductors Have a Maximum Height of 0.45 mm

New Low-profile Chip Inductors Have a Maximum Height of 0.45 mm

Coilcraft New Low-profile Chip Inductors Have a Maximum Height of 0.45 mm

  • Maximum height of just 0.45 mm – 30% lower than competitive products
  • 23 inductance values from 1.2 to 56 nH
  • Excellent Q Factor performance – up to 84 at 2.4 GHz
  • Self-resonant frequencies as high as 27.5 GHz
  • High current handling capability – up to 2.3 Amps

The 0402CT Series of low profile chip inductors are wirewound ceramic core inductors with high Q factor, high self-resonant frequencies and a 30% lower profile than competitive products. The 0402CT series has a maximum height of 0.45 mm and offers excellent RF performance for wearables and other height limited devices.

Core material Ceramic

Environmental RoHS compliant, halogen free

Terminations RoHS compliant matte tin over nickel over silverplatinum-glass frit.

Weight 0.6 – 0.8 mg

Ambient temperature –40°C to +125°C with Irms current

Maximum part temperature +140°C (ambient + temp rise).

Storage temperature Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332

Packaging 2000/7″reel; Paper tape: 8 mm wide, 0.6 mm thick, 2 mm pocket spacing

PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.

Courtesy of Coilcraft

share post: