PGA-60 Signal Generator by HAROGIC Technologies

PGA-60 Signal Generator by HAROGIC Technologies

PGA-60 Signal Generator by HAROGIC Technologies

The PGA-60 from HAROGIC Technologies is a Handheld Vector Signal Generator (VSG) that operates from 9 kHz to 6 GHz. It is designed to deliver laboratory-grade RF performance for both laboratory and field test applications in a compact form factor. This signal generator consists of a 16-bit DAC for producing high-quality baseband waveforms and a high-performance FPGA interpolator for fine sampling-rate adjustment. It supports multiple signal sweep modes, including single-tone, multi-tone, frequency sweep, power sweep, and digital ramp sweep, with a 100 MHz playback bandwidth and a 50 MHz real-time streaming bandwidth. This VSG delivers an output power from -100 dBm to +14 dBm and has a phase noise of -124 dBc/Hz at 10 kHz offset.

The PGA-60 supports analog modulation schemes including AM, FM, and PM, along with digital modulation formats ranging from ASK, FSK, and PSK to 1024-QAM, DSSS, and OFDM. It integrates a 10.1-inch IPS multi-touchscreen display that supports multi-tone signal generation with configurable tone spacing, phase modes, and in-band notches. This VSG can interface with the SGStudio software for automated frequency response and compression point measurements, and can be controlled remotely via USB 3.0 Type-C and Gigabit Ethernet interfaces, with additional GNSS antenna and reference clock ports for enhanced synchronization. It consumes 35 W of power and supports up to 2.5 hours of operation. This generator is available in a portable enclosure measuring 260 × 185 × 46 mm and an N-type (female) connector.

Product Details

  • Part Number: PGA-60
  • Manufacturer: HAROGIC Technologies
  • Description: Handheld Vector Signal Generator from 9 kHz to 6 GHz for Lab and Field Test Applications

General Parameters

  • Type: Vector Signal Generator
  • Equipment Type: Portable / Handheld
  • Configuration: USB / Computer Controlled
  • Frequency: 9 kHz to 6 GHz
  • Resolution: 0.1 to 1 Hz
  • Modulation: QAM, PSK, FSK, ASK, APSK
  • Output Power: -100 to 25 dBm
  • SSB Phase Noise: -138 to -98 dBc/Hz
  • Impedance: 50 Ohms
  • Memory: RAM / EMMC: 4 GB / 32 GB
  • Bandwidth: 100 MHz RAM playback, 50 MHz continuous streaming
  • Storage Temperature: -20 to 70 Degree C
  • Real-Time Bandwidth: 50 MHz
  • Temperature: 0 to 50 Degree C
  • Harmonics: -75 to -42 dBc
  • Weight: 1.4 kg
  • Output Connector: N Type – Female
  • Dimension: (D × W × H): 260 × 185 × 46 mm
  • Interface: USB3.0 Type-C × 1, USB2.0 Type-C × 1, USB2.0 Type-A × 1, RJ45, LAN
  • Display: IPS LCD 1280 × 800, 10.1-inch multi-touch screen
  • Battery Life: 2.5 hours
  • Note: Power Consumption: 35 W

Get in touch for orders or any queries: sales@rfdesign.co.za | +27 21 555 8400

Courtesy of HAROGIC Technologies

share post: