Watech HTN9G10S130HB: A 130W LDMOS Power Amplifier Covering 1.8–1000 MHz

From HF through UHF, high-power systems need an amplifier that is efficient and tough. The Watech HTN9G10S130HB is a discrete LDMOS power amplifier that delivers 130W of saturated output power across 1.8 to 1000 MHz from a 28 V supply. It’s part of Watech’s STREAM-PA™ series, which also covers its Civilian C-UAS power amplifiers.
Key features
- Frequency range: 1.8–1000 MHz
- Saturated output power: 130W
- Operating drain voltage: +28 V
- Thermal stability: low thermal resistance package
- Robustness: a design aimed at preventing device degradation
- Package: ACC0906B-2L, a flanged balanced air-cavity ceramic package with 2 leads and 2 mounting holes (RoHS compliant)
Performance
Watech’s CW measurements on its application board at 700–800 MHz (25 °C, VDD = 28 V, IDQ = 100 mA):
| Frequency | Gain | P3dB | Efficiency @ P3dB |
|---|---|---|---|
| 700 MHz | 19.2 dB | 52.6 dBm | 72.2% |
| 750 MHz | 20.8 dB | 52.1 dBm | 73.7% |
| 800 MHz | 19.1 dB | 51.6 dBm | 72.3% |
Under pulsed CW (100 µs pulse width, 10% duty cycle), efficiency at P3dB reaches 74.7% at 750 MHz, with P3dB of 52.3 dBm.
Load pull performance
At 860 MHz, tuning for maximum output power gives 199.5 W at P3dB with 71.2% efficiency. Tuning for maximum drain efficiency instead gives 78.3% efficiency at 138 W, with 25.1 dB gain. These figures show the headroom available when the design is tuned for a specific goal.
Built to survive mismatch
In Watech’s load mismatch test, the device ran at 750 MHz at its P3dB power of 130W into a 65:1 VSWR at all phase angles, and passed. That matters in real deployments, where antennas and loads don’t always behave.
Applications
- Analog and digital broadcasting
- Meteorological and aviation radar
- Industrial laser sources and plasma equipment
- Nuclear magnetic resonance (NMR) instruments
- Particle accelerators
- Civilian counter-UAS (C-UAS) systems
Reference design and packaging
Watech offers a 0.7–0.8 GHz evaluation board (EVB). The datasheet includes the layout and bill of materials, using Murata capacitors on Rogers 4350B (30 mil) substrate soldered to a 110 × 70 mm copper base plate. The device ships on a 13-inch reel with 500 pieces per reel.
Ratings and handling
- Drain voltage: −0.5 to +65 V
- Junction temperature: −40 to +225 °C
- Thermal resistance (active die to case): 3.8 °C/W typical
- Moisture sensitivity: MSL 3
This is a full product datasheet (Rev 1.1, January 2026), so the figures are final production specifications. Confirm the latest details with Watech before design-in.
Download Datasheet
Want datasheets, samples or pricing for the HTN9G10S130HB? Contact RF Design.
Get in touch for orders or any queries: sales@rfdesign.co.za / +27 21 555 8400
Courtesy of Watech Electronics (WATECH)