ASGGB254.A GPS/GNSS Antenna by Taoglas
The ASGGB254.A from Taoglas is a Single Band Active GNSS Patch antenna for GPS, GLONASS, BeiDou, Galileo and IRNSS bands. It consists of a two-stage LNA and a front-end SAW filter to reduce out of band noise such as from nearby cellular transceivers and this improves the probability of the wireless device passing radiated spurious emissions certification. The active circuitry is embedded between the ceramic patch and PCB base making it easy to mount directly on a PCB. It is available in a ceramic module that measures 25 x 25 x 6.45 mm with an SMD antenna and requires a 70 x 70 mm ground plane however smaller ground planes can be used.
The RHCP polarized antenna provides a total gain of 30 dB (through the antenna, SAW filter and LNA) and has a noise figure of less than 2.7 dB. It has an axial ratio of up to 17.6 dB and a VSWR of less than 3.8:1. The ASGGB254.A requires a DC supply of 1.8-5.5 V and consumes up to 11.06 mA of current. It is produced in a TS16949 automotive quality approved facility and is 100% tested for gain (S21) and return loss (S11) to ensure total consistency of performance. is ideal for navigation, commercial transportation, and asset tracking applications.
Product Details
- Part Number: ASGGB254.A
- Manufacturer: Taoglas
- Description: 25 mm Active GNSS Patch Antenna for Navigation and Asset Tracking
General Parameters
- Active/Passive: Active
- Application Industry: Commercial, Transportation & Telematics
- Application Type: Asset tracking, Navigation
- Type: Chip
- Frequency Bands: L1, L2, L5, G1, G2, G3, E1, E5a, E5b, E6, B1, B2a, B2b, B3, L6
- Frequency: 1561 to 1602 MHz
- Gain: 1 to 2.7 dB
- Constellation: GLONASS, GPS, Galileo, BeiDou
- Efficiency: 51 %, 69.6 %, 52.9 %
- VSWR: 2.70:1, 3.50:1, 3.80:1
- Impedance: 50 Ohms
- Dimension: 50 x 50 mm
- Integration: Filter, LNA
- Mounting: Surface Mount
- Material: Ceramic
- Polarization: RHCP
- Weight: 12 g
- Axial Ratio: 10 to 17.6 dB
- Operating Temperature (°C): -40 to 85 Degree C
Courtesy of everything RF

SEONGJI LSM100A
SEONGJI LSM100A-EVK
36M-RA-C-RG174: MCX Male Right Angle Crimp for RG-174/U cable
18M-C-LMR400: N-Type Male Crimp for LMR®-400 Cable
17F-C-BK-RG58: BNC Female Crimp Bulkhead for RG-58/U & LMR®-195 Cable
17M-C-RG174: BNC Male Crimp for RG-174/U Cable
14-235C: SMA Male to SMA Female
ALLYSTAR Multi-System GNSS Positioning Module TAU1105
CA20M29ME1M: Cable Assembly SMA-M to UHF-M, C195, 1M
20M-C-RG174: SMA Male Crimp for RG-174/U Cable
ALLYSTAR TAU1202 Multi-Band Multi-System GNSS Positioning Module
RF DESIGN ACTIVE GPS ANTENNA – MCX 5M
20F-RP-PCB: SMA Female Reverse Polarity for PCB Mount
12M-C-RG58: TNC Male Crimp for RG-58/U Cable
U-BLOX MULTI-BAND, HIGH PRECISION GNSS ANTENNA, 5M, RG-174, SMA-M
14-100A: FME Male to FME Male Adapter
14-102D: N-type Female to SMA-Male, straight
U-BLOX ZED-F9P HIGH PRECISION GNSS MODULE
36F-PCB: MCX Female for PCB Mount
Cavli Wireless C42GM Mini PCI
TAOGLAS PENTA BAND BULKHEAD MOUNT ANTENNA
ACSIP EK-ST50H
20M-C-RG58: SMA Male Crimp for RG-58/U and LMR®-195 Cable
20FPN2HOLE: SMA Female Panel Mount - 2 Hole
U-BLOX NINA-B112 STAND-ALONE BLUETOOTH 5 LOW ENERGY MODULE WITH NFC
U-BLOX ANNA-B112 EVALUATION KIT
U-BLOX NINA-B302 EVALUATION KIT
36F-C-BK-RG174: MCX Female Crimp for RG-174/U - Bulkhead Mount
HANDYWAVE BLUETOOTH RADIO SERIAL MODEM LINK SET
U-BLOX NINA-B112 EVALUATION KIT
Nordic NRF9151-DK
U-BLOX EVK-M8N GNSS WITH TCXO EVALUALTION KIT
u-blox NEO-M8N with TCXO
u-blox SAM-M10Q
u-blox NEO-6Q
u-blox LEON-G100-08S
RF DESIGN SARA-U201 TERMINAL STARTER PACK (END OF LIFE (LIMITED STOCK - CONTACT YOUR CLOSEST SALES OFFICE))
U-BLOX SARA-R410 LTE MODULE FOR MULTI-REGIONAL USE (NOT RECOMMENDED FOR NEW DESIGNS - SEE SARA-R422)
RADIOMETRIX RX1-173.225-10 FM RECEIVER
RADIOMETRIX TX1-173.225-10 FM TRANSMITTER
RADIOMETRIX CONTROL 44 EVALUATION KIT – NO MODULES 