Coilcraft Miniature Air Core Inductors Offer High Q and a Wide Range of Standard EIA Inductance Values

Q factors up to 100 at 150 MHz
Wide range of standard EIA inductance values from 2.5 to 150 nH with tolerances as low as 2%
Tight tolerance can eliminate circuit tuning
Acrylic jacket provides a flat top for pick and place
Solder coated leads ensure reliable soldering
Available in two sizes: 4.45 × 3.94 × 3.15 mm and 6.86 × 4.45 × 3.15 mm
Small air core inductors feature high Q and tight tolerances
Acrylic jacket provides a flat top for pick and place
Solder coated leads ensure reliable soldering
Wide range of standard EIA inductance values
Available in two sizes: 4.45 × 3.94 × 3.15 mm and
86 × 4.45 × 3.15 mm

Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost.

Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current

Storage temperature Component: –40°C to +140°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332

PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash.

Courtesy of Coilcraft