The new 0805USBN Series common mode chokes measure just 2.0 x 1.2mm, with a maximum height of 0.93mm, making them the lowest profile 0805 common mode chokes available. They offer up to 6.5 GHz differential model 3 dB cutoff frequency and up to 35 dB common mode noise attenuation across a wide frequency range up to GHz band.
Coilcraft
www.coilcraft.com
0805USBN Low Profile Common Mode Chokes
- For noise suppression in super high speed signal lines: USB 3.x, HDMI 2.0, HDBaseT™,DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
- Up to 6.5 GHz differential mode 3 dB cutoff frequency
- Up to 35 dB common mode noise attenuation in GHz range
- Suitable for USB-type C specification 1.0
- Designed for high temperate applications – 125°C
- 8 impedance values to meet your specific requirements
- Refer to Designing Common Mode Filters for design guidance.
- RoHS-compliant, halogen free. 260°C compatible. Matte tin over nickel over silver-platinum-glass frit terminations.
- Low profile (<1.0 mm), with a compact 0805 footprint; for an even smaller size, see 0603USB
- Samples of all our USB filters are available in Coilcraft Designer’s Kit C470
SPECIFICATIONS
Attenuation curves
Impedance curves
S-Parameters
Dimensions
Tape and reel specifications
3D model
Part number1
Click for samples |
Common mode
impedance typ (Ohms) |
Common mode
attenuation typ (dB) |
L2
min (nH) |
DCR3
max (Ohms) |
Isolation
(Vrms) |
Irms4
(mA) |
||||
---|---|---|---|---|---|---|---|---|---|---|
10 MHz
|
100 MHz
|
500 MHz
|
10 MHz
|
100 MHz
|
500 MHz
|
|||||
0805USBN-121MR_ | 2 | 12 | 57 | 0.04 | 0.5 | 5.0 | 14 | 0.11 | 250 | 500 |
0805USBN-271MR_ | 3 | 27 | 125 | 0.09 | 1.4 | 10.0 | 30 | 0.14 | 250 | 500 |
0805USBN-481MR_ | 5 | 48 | 231 | 0.13 | 3.5 | 14.7 | 53 | 0.22 | 250 | 500 |
0805USBN-701MR_ | 7 | 70 | 342 | 0.18 | 5.3 | 17.4 | 77 | 0.235 | 250 | 500 |
0805USBN-941MR_ | 10 | 94 | 493 | 0.30 | 7.6 | 21.1 | 105 | 0.27 | 250 | 500 |
0805USBN-132MR_ | 13 | 130 | 697 | 0.50 | 10.0 | 24.4 | 140 | 0.32 | 250 | 500 |
0805USBN-162MR_ | 17 | 165 | 955 | 0.78 | 12.1 | 27.3 | 182 | 0.37 | 250 | 450 |
0805USBN-222MR_ | 24 | 225 | 1310 | 1.14 | 14.0 | 30.0 | 252 | 0.63 | 250 | 350 |
|
||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | When ordering, please specify packaging code: e.g. 0805USBN-222MRC |
Packaging: | C = 7″ machine-ready reel EIA-481 embossed plastic tape (2000 per full reel). B = Less than full reel In tape, not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). |
2 | Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. | |
3 | DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator. | |
4 | Irms: Current per winding that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. | |
5 | Ambient temperature range: | −40°C to +125°C |
6 | Storage temperature range: | Component: −40°C to +140°C Tape and reel packaging: −40°C to +80°C |
7 | Maximum part temperature: +140°C (Ambient + temperature rise) | |
8 | Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. | |
9 | Electrical specifications at 25°C. | |
Refer to Soldering Coilcraft Components before soldering. | ||
PCB washing: Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info. |