QPC9314 Front End Module by Qorvo

Courtesy of everything RF : QPC9314 Front End Module by Qorvo

The QPC9314 from Qorvo is a front end module developed for TDD macro or picocell base stations. It consists of a high power switch and Low Noise Amplifier that operate from 2.3 to 2.7 GHz. This FEM integrates RF functional blocks such as a pin-diode based high power switch that can handle up to 52 Watts with an LTE signal (8 dB PAR) along with two LNA stages, and a 1-bit DSA to provide a high and low gain mode. This Switch/LNA module has a pin diode driver and dc-dc converter circuits integrated into the module and thus requires a single 5 V supply. The control voltage for the switch and gain control mode is with 3.3 V logic. The QPC9314 is available in a RoHS-compliant, 8×8 mm surface-mount leadless package. The switch LNA module is targeted for wireless infrastructure applications configured for TDD-based architectures.

Product Details

  • Part Number : QPC9314
  • Manufacturer : Qorvo
  • Description : 2.3 to 2.7 GHz High Power Switch LNA Module

General Parameters

  • Type : Transmit / Receive Module
  • Configuration : Switch, Low Noise Amplifier
  • Application Industry : Wireless Infrastructure, Base Stattion
  • Wireless Standard : LTE
  • Frequency : 2300 to 2700 MHz
  • Tx Power : 23 dBm
  • Tx Current : 140 mA
  • Voltage : 4.75 to 5.25 V
  • Rx Gain : 24 dB( Low Gain Mode), 33 dB(High Gain Mode)
  • Rx Noise Figure : 1.2 dB
  • Rx Current : 240 mA
  • Insertion Loss : 0.5 dB (Tx Mode)
  • Package Type : Surface Mount
  • Dimensions : 8 x 8 mm
  • RoHS : Yes
share post: