QPB9380 Front End Module by Qorvo The QPB9380 from Qorvo is a Dual Channel Switch-LNA Front End Module that operates from 2.3 to 5 GHz. It has been developed for 5G TDD base stations. The FEM integrates a two-stage LNA and switches in a dual-channel configuration (the second stage LNA has an integrated bypass mode). In Rx...
Read More
nRF52805 Wireless SoC by Nordic Semiconductor The nRF52805 from Nordic Semiconductor is a Bluetooth 5.2 System-on-Chip (SoC) which is designed for small two-layer PCB designs. This SoC has been developed for cost-constrained applications and is the perfect choice for applications such as beacons, disposable medical devices, sensors, styluses, and presenters. The 2.4 GHz multiprotocol radio provides up...
Read More
NEO-F9P GNSS Module by u-blox AG The NEO-F9P from u-blox is a multiband GNSS Module for high-volume industrial applications. It supports concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations and has integrated L1/L5 RTK technology for centimeter-level accuracy. This module ensures the security of positioning and navigation information by using secured interfaces and advanced jamming and...
Read More
TW3752AJ GPS/GNSS Antenna by Tallysman Wireless The TW3752AJ from Tallysman Wireless is a Single-Band Anti-Jam GNSS Antenna. It employs Tallysman’s unique Accutenna technology to provide single band GPS/QZSS-L1, GLONASS-G1, Galileo-E1, and BeiDou-B1 coverage, including the satellite-based augmentation system (SBAS) available in the region of operation [WAAS (North America), EGNOS (Europe), MSAS (Japan), or GAGAN (India)]. This RHCP-antenna...
Read More
QPQ1060 Band Pass Filter by Qorvo The QPQ1060 from Qorvo is a SAW Filter Module for the GPS L1 band that has a passband from 1559.92 to 1590.92 MHz. It has a bandwidth of 31 MHz, an insertion loss of less than 2 dB, and provides an out-of-band attenuation of up to 46 dB. This band pass...
Read More
Nordic Semiconductor nRF9160 SiP and nRF5340 SoC achieve PSA Certified Level 2 for enhanced IoT security assurance Cellular IoT SiP and flagship multiprotocol SoC gain PSA Certified Level 2 verifying protection against scalable, remote software attacks Nordic Semiconductor announces today that its nRF9160™ low power System-in-Package (SiP) with integrated LTE-M/NB-IoT modem and GNSS, and nRF5340™ advanced multiprotocol...
Read More
E9130H RF Switch by KRATOS General Microwave The E9130H from Kratos is a Reflective SP3T Switch that operates from 1 to 18 GHz. It has a TTL control interface with a rise/fall time of 10 nsec. This switch provides more than 60 dB of isolation and has an insertion loss of less than 2.6 dB. It can...
Read More
TW5386 GPS/GNSS Antenna by Tallysman Wireless The TW5386 from Tallysman is an Integrated Multi-band, Multi-Constellation GNSS Receiver with an antenna. The receiver has an Inertial Measurement Unit (Untethered Dead Reckoning) and RTK for Precise Point Positioning. It can provide sub-1 meter accuracy (standalone) and sub-10 cm accuracy with RTK corrections. The receiver uses a multi-band architecture for...
Read More
ATNXX-00110CH Series Fixed Attenuator by Marki Microwave The ATNXX-00110CH Series from Marki Microwave is a Fixed Attenuator with Frequency DC to 110 GHz, Attenuation 0 to 10 dB, Operating Temperature -55 to +100 Degree C, Storage Temperature -65 to +125 Degree C. Tags: Die. More details for ATNXX-00110CH Series can be seen below. Product Details Part Number:...
Read More
ADM-8556 RF Amplifier by Marki Microwave The ADM-8556 from Marki Microwave is a Low Noise Amplifier that operates from 6 to 20 GHz. It provides a small signal gain of 24 dB with a noise figure of 1.3 dB and has a P1dB power of 16 dBm. This amplifier is ideal for applications requiring low power consumption...
Read More
