QPB9350 0.4-1.0 GHz Dual Channel Rx DVGA by Qorvo Key Features 0.4-1.0 GHz Operating Range Integrates 2 LNAs and one DSA in dual channels LNA1 in/out port pinned out LNA1: 0.4dB NF, 23dB Gain, 37dBm OIP3 31dB Gain control in 1dB steps 44.5dB max line-up Gain 5V supply SPI control interface for DSA 1.8V logic...
Read More
QPF4239 Front End Module by Qorvo The QPF4239 from Qorvo is a Wi-Fi 7 (802.11be) Front-End Module (FEM) that operates from 2412 to 2484 MHz. It consists of a 2.4 GHz power amplifier (PA), single pole two throw switch (SP2T), and by-passable low noise amplifier (LNA). This FEM also has an RF output coupler and a broad-range,...
Read More
QPD1006 RF Transistor by Qorvo The QPD1006 from Qorvo is a GaN-on-SiC HEMT Transistor that operates from 1.2 to 1.4 GHz. It provides a CW output power of 313 Watts with a gain of 17.5 dB and a pulsed power of 468 Watts with a gain of 17.8 dB and has a drain efficiency of over 55%....
Read More
Modelithics Releases New Library (v24.5.4) for Qorvo GaN Products with Backwards Compatibility Modelithics has announced the release of version 24.5.4 of the Modelithics Qorvo GaN Library for use with Keysight Technologies’ Advanced Design System (ADS) and Cadence AWR Design Environment®. This release is compatible with Keysight ADS 2022 - 2024 Update 2 and Cadence AWR Design Environment 16...
Read More
QPF4659 Front End Module by Qorvo The QPF4659 from Qorvo is a Wi-Fi 7 Front-End Module (FEM) that operates from 5.925 to 7.125 GHz. It consists of a power amplifier (PA), single-pole double-throw (SP2T) switch, low noise amplifier (LNA), broad range, constant slope voltage logarithmic power detector, and an RF coupler. This FEM is matched to 50...
Read More
QPP0021 Balun by Qorvo The QPP0021 from Qorvo is a 1:1 RF Balun that operates from 45 to 1218 MHz. It converts a 75-ohm balanced input to a 75-ohm unbalanced differential output with a phase balance of ±7° and an amplitude balance of ±1.4 dB. This balun can handle an input power of up to 36 dBm...
Read More
QPF4750 Front End Module by Qorvo The QPF4750 from Qorvo is a Wi-Fi 6E (802.11ax) Front-End Module (FEM) that operates from 5 to 7 GHz. It integrates a power amplifier (PA), a single pole two-throw (SP2T) switch, and a bypassable low noise amplifier (LNA) into a single device. This FEM implements very wideband amplifier technology to create...
Read More
Qorvo QPA0524 24.25 - 26.5 GHz 5 Watt GaN Power Amplifier Key Features Frequency Range: 24.26 - 26.5 GHz Linear POUT: 26 dBm ACPR (POUT = 26 dBm, 802.11ac): -30 dBc POUT (PIN = 20 dBm): 37 dBm PAE (PIN = 20 dBm): 23 % Small Signal Gain: 23 dB Bias: VD = 20 V, IDQ = 126 mA, VG =...
Read More
QPC8018Q RF Switch by Qorvo The QPC8018Q from Qorvo is an SP5T Switch that operates from 617 to 6000 MHz. It has a switching speed of 3.2 ns and provides up to 48 dB of isolation. This switch can handle up to 5 W of input power and has an insertion loss of less than 1.33 dB....
Read More
Qorvo® Extends RF Multi-Chip Module Leadership in Advanced Radar Applications NEW DEVICES OPTIMIZED FOR PERFORMANCE AND SIZE ACROSS X-, S- AND L- RADAR BANDS Download full size image GREENSBORO, NC – June 18, 2024 – Qorvo® (Nasdaq: QRVO), a leading global provider of connectivity and power solutions, today announced the launch of three new highly integrated RF multi-chip modules...
Read More
