QPB1029 L-Band Switched Filter Bank Module by Qorvo The QPB1029 from Qorvo is a Switched Filter Bank Module that operates from 1.2 to 1.4 GHz. It integrates two switches on both sides of 8 filters (8 channels) and a bypass. This switched filter bank has a bandwidth of 25 or 50 MHz and an out-of-band...
Read More
QM33120WDK2 Development Kit from Qorvo The Qorvo® QM33120WDK2 is a development kit for the low power, low cost QM33110W and QM33120W UWB transceivers. This kit can be used to evaluate the UWB technology in various infrastructure topologies, using TWR, TDoA or AoA. An RTLS system can be evaluated quickly in the following modes: DL-TDoA (Downlink...
Read More
Online Panel: mmWave About The panel will discuss the latest design, test and measurement developments for mmWave devices and systems. Higher frequencies typically use over the air testing techniques for measurement and characterization while mmWave devices and systems are more difficult to design as link budgets and noise figures are more difficult to deal with....
Read More
Navigating the IoT Hype Cycle: What Matters for Connectivity and Intelligence Guidance on where IoT is headed, with Gartner research as a reference for timing and adoption. IoT is moving away from broad platforms toward targeted, high-impact applications. The change brings opportunities in connectivity, intelligence and sustainability, along with new strategic challenges. Connectivity Layers Influencing...
Read More
QPB1024 RF Amplifier by Qorvo 500 W GaN Solid-State Power Amplifier from 8 to 11 GHz The QPB1024 from Qorvo is a GaN Solid-State Power Amplifier (SSPA) that operates from 8 to 11 GHz, covering the X-band. It delivers a saturated CW output power of 58.3 dBm (500 W) with a power gain of 20.3 dB and a...
Read More
Qorvo Introduces New UWB Development Kit for Linux for Precision Location & Sensing Applications Qorvo has introduced the QM35825 Development Kit for Linux, designed to help developers evaluate Qorvo’s high-performance Ultra-Wideband (UWB) System-on-Chip (SoC) for real-time location and radar sensing applications. This kit supports two-way ranging (TWR), Time Difference of Arrival (TDoA), and other key features that enable secure, accurate...
Read More
Qorvo QPF7552 5 GHz Wi-Fi 6 U-NII2c-3 bandBoost Integrated Front End Module Key Features POUT = +16dBm MCS11 HE160 -43dB Dynamic EVM POUT = +18dBm MCS11 HE80 -43dB Dynamic EVM POUT = +21dBm MCS9 VHT80/160 -35dB Dynamic EVM POUT = +25dBm MCS0 HT20 Spectral Mask Compliance Optimized for +5 V Operation 31 dB Tx Gain...
Read More
Qorvo QPF7250 2.4 GHz Wi-Fi 6 bandBoost Integrated Front End Module Key Features POUT = +26 dBm FCC Restricted Bandedge Compliance POUT = +19.5 dBm MCS11 HE20 -43 dB Dynamic EVM POUT = +17 dBm MCS11 HE80 -43dB Dynamic EVM POUT = +22 dBm MCS9 VHT20 -35 dB Dynamic EVM POUT = +23 dBm...
Read More
Qorvo QPA1724D 17.3 - 21.2 GHz 20 Watt GaN Power Amplifier Key Features Frequency Range: 17.3 – 21.2 GHz Linear POUT: 37 dBm PSAT (PIN = 28 dBm): 43 dBm PAE (PIN = 28 dBm): 30% IMD3 (POUT/tone = 34 dBm): −22 dBc Small Signal Gain: 25 dB Integrated Power Detector Bias: VD =...
Read More
Qorvo QPF7607 6GHz Wi-Fi 7 Non-Linear High Power Front End Module Key Features POUT = +16 dBm MCS13 320 MHz -43dB Dynamic EVM POUT = +19 dBm MCS11 160 MHz -43dB Dynamic EVM POUT = +24 dBm MCS0 HE20 Spectral Mask Compliance Optimized for +5 V Operation 29 dB Tx Gain 3.4 dB Noise...
Read More
