Courtesy of Qorvo QPF7221 Front End Module The Qorvo QPF7221 is a compact front end module (FEM) for Wi-Fi 802.11b/g/n/ac/ax systems. The FEM integrates a 2 GHz power amplifier (PA), SPDT switch and bypassable low noise amplifier (LNA) and an Rx BAW filter into a single device. It provides state of the art LTE coexistence Rx…

Courtesy of everything RF : QPC3025 RF Switch The QPC3025 is a Silicon on Insulator, reflective SPDT switch that operates from 30 to 4200 MHz. It offers low insertion loss in a symmetric topology with excellent linearity. The switch can handle upto 20 W CW and 30 W pulsed power with a 50 Ohm load. The…

Courtesy of Qorvo : IoT SiP to Improve Smart Home Solutions COMMUNICATION CONTROLLER ENHANCED WITH POWER AMPLIFIER DELIVERS BETTER RANGE, LOWER DEVELOPMENT COST AND FASTER TIME TO MARKET GREENSBORO, NC, – September 14, 2018 – Qorvo® (NASDAQ: QRVO), a leading provider of innovative RF solutions that connect the world, today introduced a new System in Package (SiP)…

Courtesy of everything RF : QPB9320 Front End Module by Qorvo The QPB9320 from Qorvo is a front end module developed for TDD macro or picocell base stations that operate from 1.850 to 2.025 GHz. This FEM integrates RF functional blocks such as a pin-diode based high power switch that can handle up to 52 Watts…

Courtesy of everything RF : QPC6762 RF Switch by Qorvo The QPC6762 is a 75 Ohm Silicon on Insulator (SOI) SP6T switch that operates from 5 to 2000 MHz. It has an insertion loss of 0.40 dB, an isolation of 34 dB at 800 MHz and an IP3 of 75 dBm at 850 MHz. The switch…

Courtesy of Qorvo : QPQ1297 RF Duplexer The QPQ1297 from Qorvo is a RF Duplexer with Frequency 1.71 to 1.88 GHz, Band 1 1.71 to 1.785 GHz, Band 2 1.805 to 1.88 GHz, Insertion Loss 1.6 to 4.1 dB, Isolation 45 to 64 dB. Tags: Surface Mount. More details for QPQ1297 can be seen below. Product…

Courtesy of Qorvo : QPL9095 RF Amplifier The QPL9095 from Qorvo is a RF Amplifier with Frequency 500 MHz to 1 GHz, Gain 20.5 to 23.5 dB, Noise Figure 0.6 to 0.9 dB, P1dB 20 dBm, P1dB 0.1 W. Tags: Surface Mount, Low Noise Amplifier, Gain Block. More details for QPL9095 can be seen below. Product Details…

Courtesy of Qorvo : QPL9096 Amplifier Amplifier, Low Noise, 1.7 to 2.7 GHz, 22 dB, DFN, 2 x 2 Qorvo’s QPL9096 is a high-linearity, ultra low-noise gain block amplifier with a bypass mode functionality integrated in the product. At 1.95 GHz, the amplifier typically provides 22 dB gain, +33.5 dBm OIP3, and 0.7 dB noise figure…

Courtesy of Qorvo : QPB9319 Front End Module The QPB9319 from Qorvo is a Front End Module with Frequency 1.8 to 4.2 GHz, Voltage 3 to 5.5 V, Rx Gain 17 to 21 dB(low gain state), 35 to 39 db(High Gain State), Rx Noise Figure 1.45 to 1.7 dB, Insertion Loss 0.72 to 1 dB. Tags:…

Courtesy of Qorvo : Powers New Commercial 802.11ax Carrier Gateway QORVO 5GHZ FEM, INTEGRATED IN QUALCOMM TECHNOLOGIES’ CHIPSET, DELIVERS HIGHER THROUGHPUT AND IMPROVED CONNECTIVITY GREENSBORO, NC – July 2, 2018 – Qorvo® (Nasdaq:QRVO), a leading provider of innovative RF solutions that connect the world, today announced that its high efficiency 5GHz front end module (FEM) QPF4528 is part of a…